LED Design wall light with sensor for outside
This wall light has a lot to offer. It is equipped with a motion sensor with a detection range of 8m at a detection angle of 120°. The lighting duration can be adjusted individually from 10sec. to 5min. As long as movements in the detection range are detected, the lamp is not switched off. Of course, the switch-on sensitivity can also be regulated, or at which light conditions (10-2,000 LUX) of the motion detector turns on the lamp. To all luxury, the light can also be rotated by 360°.
The puristic housing made of bright stainless steel lends the luminaire a modern design. Two power-saving LED lamps are included in the scope of delivery, which emit fresh light with daylight at 6500K.
The highlights of the luminaire in short:
- Double spotlight 360° rotatable
- Switch-on sensitivity 10-20,000 Lux adjustable
- Operating time 10sec. - 5min. adjustable
- Detection at 8m
- Lamp does not turn off during continuous movement.
Application
On houses or walls, where glare-free, effective light illuminates the darkness somewhat. The luminaire sets particular accents through the double light beam.
Product features wall light
- Model: WAL_SENSOR_A_LED
- Operating voltage: 220-240V AC 50Hz
- Max. performance: 2x max. 35W
- Socket: GU10
- LED suitable: Yes
- Material: Stainless steel
- Surface: Blank
- Shades: Tempered glass diffuser
- Swiveling: 360°
- Housing dimensions: Ø60 x 160mm
- Projection: 110mm
- Protection grade: IP44
- Protection class: I
Product features LED lamp
| LED lighting at a glance | |
| Base: | GU10 |
| Brand: | SEBSON |
| Nominal wattage: | 3,5W |
| Nominal luminous flux: | 300lm |
| Comparative value: | approx. 30W light bulb |
| Beam angle: | 110° |
| Dimensions: | ø50 x 57mm |
| Electrical specification | |
| Operating voltage: | 230V AC 50/60Hz |
| Rated wattage: | 3,4W |
| Rated power factor: | 0,43 |
| Switching cycles: | > 12.500 |
| Lighting specification | |
| Rated luminous flux: | 308lm |
| Rated color temperature: | 6500K (cold white) |
| Rated color rendering index (CRI): | > 80Ra |
| Rated beam angle: | 110° |
| Rated starting time: | < 0,5s |
| Rated warm-up time (60 %): | instant full light |
| Colour consistency: | < 6 SDCM |
| Luminous flux maintenance: | 90.22% |
| Further specification | |
| Nominal - / rated lamp life time: | 15.000h |
| Dimmable: | no |
| Accent lighting: | no |
| Rated lamp mercury content: | 0,0mg |
| Body housing: | Plastic / Glass |
The light source is replaceable by the end user.
This product contains a light source of energy efficiency class F.
*Disposal note
Scope of delivery:
- 1 x SEBSON® Wall light
- 2 x SEBSON® GU10 LED lamp
- 2 x Screws and dowels
Hint! The adjustment controls for the switch-on sensitivity and the lighting duration are located under the sensor cap (rotatable).
Plenty Lions