Built-in and surface-mounted , Range max. 8m/360°, max. 800/400W, IP20
Quantity:
Ready for shipment, delivery time 2 days
Item number
IR_ES_D
Motion detector for surface or flush mounting
The infrared sensor detects movements of people, large animals and vehicles within a detection range of up to 8 metres at a detection angle of 360° (on a free surface) and switches on the connected lighting. After a preset time of approx. 10 seconds to 30 minutes, the motion detector switches off again. With the help of a controller, the switch-on sensitivity of this device can be regulated in relation to the ambient brightness (in the range between 3 and 2,000 LUX).
This motion detector can be installed in the ceiling (flush-mounted) and, thanks to a screw-on adapter, can also be mounted directly on the ceiling (surface-mounted).
Product features
| Operating voltage: | 220-240V AC 50/60Hz |
| Max. Power consumption: | max. 800W with usual lamps max. 400W with LED and energy saving lamps |
| Power consumption on standby: | 0,5W |
| Detection speed: | 0,6-1,5m/s |
| Detection range: | Max. 8m (< 24°C)/ 360° |
| Ambient brightness: | 3-2.000LUX |
| Protection: | IP20 |
| Switch-off delay: | min. 10s +/-3s - max. 30min +/-2min |
| Ambient temperature: | -20° to +40°C |
| Humidity: | < 93% |
| Dimensions: | Ø79x40mm |
| Mounting hole: | 61-70mm |
| Housing material: | Plastic |
Assembly and operating instructions as PDF
Scope of delivery:
- 1 x SEBSON® Built-in IR motion detector
| Item ID | 4042 |
| Condition | New |
| Age rating | No age restriction |
| Manufacturer | SEBSON |
| Manufacturing country | |
| Weight | 81 g |
| Net weight | 81 g |
| Dimensions | 0×0×0 mm |
Plenty Lions