- LED Bulbs
- LED Lights
- Security Electronics
Flush-mounted, range max. 10m/190°, max. 1200W/ 600W, IP20, 3-Wire
|Minimum quantity: 3||EUR 14.99|
Item number IR_WAL_E
IR flush-mounted motion detector with on/off switch
The infrared sensor detects movements of people, large animals and vehicles in a detection range of up to 10m with a detection angle of 190° (on a free surface) and switches on the connected lighting. After an adjustable time of approx. 10 seconds to 30 minutes, the motion detector switches off again. With the help of a controller, the switch-on sensitivity of this device can be regulated depending on the ambient brightness (in the range between 3 and 2,000 LUX). The detection area can be targeted by means of the modifiable cover. The sensor cover can be cut to size as desired.
If constant illumination (continuous light function) is desired, it is also possible to deactivate the sensor temporarily. The motion detector can be switched on and off manually or it switches on when motion is detected and off again after a preset time. The setting controls are located directly above the sensor so that they can be adjusted at any time.
This flush-mounted motion detector is suitable for wall mounting.
|Operating voltage:||220-240V AC 50/60Hz|
|Max. Power consumption:||max. 1,200W for incandescent lamps|
max. 600W for LED lamps and energy-saving lamps
|Power consumption on standby:||0.5W|
|Switch:||On, off or detector|
|Detection range:||Max. 10m (<24°C)/ 190°|
|Switch-off delay:||Min. 10s +/-3s - Max. 30min +/-2min|
|Ambient temperature:||-20° to +40°C|
|Suitable for flush-mounted boxes:||60mm|
|Suitable for cavity boxes:||68mm|
Assembly and operating instructions as PDF
Scope of delivery:
|Age rating||No age restriction|
|Net weight||90 g|