LED design outdoor light with motion detector for outside
This wall lamp is equipped with a PIR motion detector whose detection range is 9m at a detection angle of 140°. The light duration can also be set from approx. 10 sec. to 5 min. as required. As long as movements within the detection range are detected, the lamp is not switched off. Of course, the switch-on sensitivity can also be regulated, or in which lighting conditions (3 - 2000 LUX) the motion detector switches on the lamp. With a power consumption of only 20 watts, the integrated LEDs provide 1550 lumens of daylight quality light (cool white, 6000 Kelvin).
In addition, this LED outdoor light has a standby dimming function. Here, the light intensity is reduced to 15% instead of being switched off. This function can be set in steps from 0s (deactivated) to infinity (permanently activated).
The highlights of the luminaire in short:
- Switch-on sensitivity 3 - 2000 lux adjustable
- Operating time 10sec. - 5min. adjustable
- Detection range is 9m
- Standby dimming function
- Lamp does not turn off during continuous movement.
- Protection grade IP65 (suitable for indoor and outdoor use)
Application
On stairs, in entrance areas, terraces and everywhere where light is needed for greater safety.
Assembly instructions as PDF
EU Product database (EPREL)
Product features wall light
- Model: WAL_SENSOR_M_INT
- Operating voltage: 220-240V AC 50Hz
- Performance: 20W
- Luninous flux: 1550lm
- Color temperature: 6000K
- Socket: LEDs integrated
- Lifetime: 15.000h
- Cycles of switching: 15.000
- Material: Plastic (PC; Polycarbonat)
- Surface: anthrazit
- Spotlight: diffuser
- Housing dimensions: 250 x 65 x 176mm
- Protection grade: IP65
- Protection class: II

The light source is not replaceable by the end user.
*Disposal note
Scope of delivery:
- 1 x SEBSON® Wall light
- 3 x Dowels
- 3 x Screws